Pewter leaf sheets, books and packs

Lustrous silver-gray metal leaves for gilding.

Pewter leaf is a non tarnishing metal with a lustrous sheen and high reflectivity. Though Pewter leaf is non-oxodizing, it may acquire a patina over time. Modern pewter is about 91 percent tin, 7.5 percent antimony, and 1.5 percent copper. Pewter leaf sheets are 5 1.2' square and can be handled in the same manner as other metal leaves during gilding.


Chinese Pewter Leaf comes in a variety of shades and textures. Here are some technical facts about the material to consider before placing your order:

PLEASE READ COMPLETELY!

1. The material varies from sheet to sheet, there is no consistency throughout each book.

2. The material varies from pack to pack, “shuffle the books” before applying, so you don’t get zones of one shade over another in a large area.

3. Pewter leaf does not need to be sealed. However, if it is sealed, it changes the shade, texture and color of the leaf.

4. There will be tears and patches on leaves from time to time.

5. Make large samples for your client. Your client needs to see that this material varies when applied to large areas.

6. Get approvals from your client. Make sure your client understands the unique qualities of this material and accepts it.

7. This is a special order item, allow for the time needed to fulfill a large order.


Pewter Leaf Pack - 500 leaves

Pewter Leaf Pack - 500 leaves - Chinese Leaf Pack. - Each leaf is 5 1/2" x 5 1/2" square. Approx. coverage is 100 sqft

Loose Leaf - A book of loose pewter leaf is assembled by placing each piece of pewter leaf between pieces of thin rouged paper. The gilder can then remove one leaf at a time without disturbing the remaining leaves.


SA1014/PW $ 680.00
Pewter Leaf Pack - 500 leaves - Color 1
Loose Leaf

Pewter Leaf Books - 100 leaves

Pewter Books - 100 leaves - Chinese Leaf Books. Each leaf is 5 1/2" x 5 1/2" square. Approx. coverage is 20 sqft.

Loose Leaf - A book of loose pewter leaf is assembled by placing each piece of pewter leaf between pieces of thin rouged paper. The gilder can then remove one leaf at a time without disturbing the remaining leaves.


SA1014/PW/B $ 182.00
Pewter Leaf Book - 100 leaves
Loose Leaf

Product Description

Each leaf is 5 1/2" square. Approx. coverage is 100 sqft per pack of 500 leaves. Approx. 20 sqft per book of 100 leaves.

Loose Pewter Leaf, - A book of loose pewter leaf is assembled by placing each piece of pewter leaf between pieces of thin rouged paper. The gilder can then remove one leaf at a time without disturbing the remaining leaves.

This product is available to ship immediately. All our Pewter Leaf products are shipped fully insured via UPS.

Related Products